Mitsubishi Jet Towel
Slim & Smart — India's Only LEED Hand Dryer
Authorized distributor for Mitsubishi Electric India. Jet Towel Slim (JT-SB216KSN) and Smart (JT-SB116EH2) — the only hand dryers in India earning LEED credits across Water Efficiency, Energy & Atmosphere, IEQ and Materials & Resources. Trusted by Google India, Jindal Steel and Commonwealth Bank of Australia.
Japan's precision engineering — LEED ready
Only LEED Hand Dryer in India
The Jet Towel is the only hand dryer in India that earns LEED credits across four categories — WE, EA, IEQ and MR.
Up to 80% Energy Saving
Slim: 1,000 W vs 2,200 W conventional. Smart: 900 W. Both deliver measurable LEED EA Credit 1 points.
HEPA Filtration Standard
Jet Towel Slim ships with HEPA filter as standard — 99.97% particle capture at 0.3 μm. Hospital-grade air hygiene.
Made in Japan Since 1921
Mitsubishi Electric has manufactured precision appliances in Japan for over 100 years. 30+ year Jet Towel track record.
Slim & Smart — two models, one LEED strategy
Both Jet Towel models are LEED-eligible and available in India through Insha Exports. Choose the Slim for premium washrooms where aesthetics and maximum LEED credits matter. Choose the Smart for compact spaces, retrofits and staff facilities. Both include the full LEED documentation pack.
Jet Towel Slim
Flagship model — ultra-slim, HEPA standard, maximum LEED credits
The Mitsubishi Jet Towel Slim is Japan's most specified hand dryer for premium commercial washrooms — five-star hotels, Grade A offices, airports and embassies. Its ultra-slim 105 mm profile integrates into any washroom design without compromising on performance. Both sides of the hands are dried simultaneously in 10 seconds using high-velocity air blades at 100 m/s. HEPA filter is standard — 99.97% particle capture at 0.3 μm. The only hand dryer in India that earns LEED credits across four categories.
- Only LEED-certified hand dryer in India
- Dries both sides simultaneously — 10 seconds
- 80% energy saving vs 2,200 W conventional dryers
- HEPA filter standard — hospital-grade air hygiene
- Ultra-slim 105 mm depth — premium washroom integration
- Earns LEED WE + EA + IEQ + MR credits
- Ultra-quiet 61 dB(A) — suitable for hotel lobbies
- Touchless — zero cross-contamination
- ECO mode — automatic power reduction in low traffic
- Made in Japan — 30+ year track record
- WE Credit 1 — Water Use Reduction — eliminates paper towel manufacturing water & wastewater TDS burden
- EA Credit 1 — Optimise Energy Performance — 80% energy saving vs conventional dryers
- IEQ Credit 3.1 — Construction IAQ Management — HEPA 99.97% filtration standard
- MR Credit 2 — Construction Waste Management — eliminates paper towel waste stream entirely
Jet Towel Smart
Compact model — smaller footprint, retrofit-friendly, LEED eligible
The Mitsubishi Jet Towel Smart is the compact variant of the Jet Towel range — designed for smaller washrooms, staff toilets, retail units and retrofit installations where wall space is limited. At 900 W and 12-second dry time, it delivers the same blade-drying technology as the Slim in a smaller footprint. LEED-eligible across WE and EA credit categories. Ideal for projects where the Slim's 305 mm width cannot be accommodated.
- Compact footprint — fits smaller washrooms and retrofits
- Blade-drying technology — both sides in 12 seconds
- 59% energy saving vs 2,200 W conventional dryers
- LEED WE + EA credit eligible
- Optional HEPA filter upgrade
- Touchless — zero cross-contamination
- ECO mode — automatic power reduction
- Lighter weight — easier wall mounting
- Made in Japan — Mitsubishi Electric quality
- Ideal for staff toilets, retail, retrofit projects
- WE Credit 1 — Water Use Reduction — eliminates paper towel waste water footprint
- EA Credit 1 — Optimise Energy Performance — 59% energy saving vs conventional dryers
- MR Credit 2 — Construction Waste Management — eliminates paper towel waste stream
Why the Mitsubishi Jet Towel is essential
for every LEED green building specification.
The Jet Towel is the only washroom product in India that earns LEED credits across four categories simultaneously — Water Efficiency, Energy & Atmosphere, Indoor Environmental Quality and Materials & Resources. For MEP consultants targeting LEED Gold or Platinum, it is one of the highest-value single-product specification decisions available.
Eliminates paper towel water footprint — permanently.
Paper towel manufacturing is a water-intensive industrial process — replacing paper towels with the Jet Towel helps reduce a building's overall indoor water footprint, contributing directly to LEED WE Credit 1. The Jet Towel also lessens the burden on a building's wastewater treatment systems by eliminating paper waste from the wastewater flow. Paper waste adds organic matter to wastewater, increasing the treatment load and TDS levels in the building's effluent. While recycled paper products can contribute to LEED points, electric hand dryers eliminate the need for paper products entirely — offering a more comprehensive water conservation strategy. The Mitsubishi Jet Towel is designed and certified to meet the requirements of LEED-certified buildings, and Insha Exports provides the WE credit documentation for your project submission.
Eliminates paper towel water footprint · reduces wastewater burden · stronger than recycled paper strategy
80% energy saving — measurable, documentable, LEED-submittable.
The Jet Towel Slim consumes 1,000 W per use cycle versus 2,200 W for a conventional warm-air dryer — an 80% reduction in energy consumption per hand-drying event. In a high-traffic washroom with 500 uses per day, this translates to 219 kWh saved per month and approximately ₹18,000–₹22,000 in annual electricity savings. The energy saving calculation is independently verifiable and is accepted by LEED auditors as evidence for EA Credit 1 (Optimise Energy Performance). Insha Exports provides the energy saving calculation sheet for your LEED submission.
219 kWh/month saved · ₹18,000–22,000/year electricity saving (500 uses/day)
HEPA filtration — hospital-grade air quality in every washroom.
The Jet Towel Slim ships with a HEPA filter as standard — 99.97% particle capture at 0.3 μm. This means the air expelled during hand drying is cleaner than the ambient washroom air. In a building targeting LEED IEQ Credit 3.1 (Construction IAQ Management), the Jet Towel's HEPA filtration is documented evidence of enhanced indoor air quality management in washroom spaces. The HEPA filter specification is included in the product datasheet and is accepted by LEED auditors as supporting evidence for IEQ credits.
99.97% particle capture at 0.3 μm — HEPA standard (Slim model)
Eliminates the paper towel waste stream — permanently.
Paper towels are the single largest source of washroom waste in commercial buildings. A building consuming 50 kg of paper towels per month generates 600 kg of paper waste per year from washrooms alone — all of which goes to landfill or requires recycling infrastructure. Installing Jet Towel hand dryers eliminates this waste stream entirely. LEED MR Credit 2 (Construction Waste Management) recognises waste elimination strategies, and the permanent elimination of paper towel waste is one of the most straightforward MR credit contributions available to a building's specification team.
600 kg/year paper waste eliminated (50 kg/month building)
TDS, water management and the Mitsubishi Jet Towel — what your LEED auditor needs to know.
TDS (Total Dissolved Solids) does not directly apply to the Mitsubishi Jet Towel itself — it is an electric hand dryer, not a water-using fixture. However, TDS is relevant to a LEED-certified building's overall water management strategy, and the Jet Towel contributes to that strategy in three measurable ways.
Reduced indoor water use: Paper towels require water in their manufacturing and disposal. By replacing paper towels entirely, the Jet Towel helps reduce a building's overall indoor water footprint — a direct contribution to LEED Water Efficiency (WE) credits.
Reduced wastewater burden: The Jet Towel lessens the load on a building's wastewater treatment systems by eliminating paper waste from the wastewater flow. Paper waste adds organic matter to wastewater, increasing the treatment burden and contributing to elevated TDS levels in the building's effluent.
Stronger than recycled paper: While recycled paper products can contribute to LEED points, electric hand dryers eliminate the need for paper products entirely — offering a more comprehensive alternative strategy for water conservation and waste reduction.
Mitsubishi Jet Towel is designed and certified to meet the requirements of LEED-certified buildings. Its contribution to water efficiency — through paper towel elimination, reduced wastewater burden and indoor water footprint reduction — is documented in the LEED product data sheet available from Insha Exports.
Insha Exports provides the full LEED water efficiency documentation pack — WE credit calculation, wastewater reduction narrative, product data sheet and Mitsubishi distributorship letter — for your project's LEED submission. Contact [email protected].
Need the full LEED documentation pack for your project submission?
WE credit calculation · EA energy saving analysis · IEQ HEPA certificate · MR waste elimination data · TDS narrative · Distributorship letter — all in one pack, within 48 hours.
Trusted by global organisations — supplied by Insha Exports
The Mitsubishi Jet Towel is the hand dryer of choice for organisations that demand LEED compliance, operational reliability and the assurance of a 30-year Japanese engineering track record.
Commonwealth Bank of Australia
Sydney, Australia
Jet Towel Slim JT-SB216KSN specified across all washroom facilities at the Commonwealth Bank of Australia headquarters. Selected for LEED compliance, ultra-slim profile integration into premium washroom design, and the 10-second dry time standard required for a high-footfall Grade A corporate environment.
Google India — Hyderabad Campus
Hyderabad, India
Mitsubishi Jet Towel specified at Google India's Hyderabad campus as part of the building's LEED Platinum certification strategy. The Jet Towel's contribution to WE Credit 1 (paper towel elimination), EA Credit 1 (energy saving) and IEQ Credit 3.1 (HEPA filtration) was documented in the LEED submission. Insha Exports supplied and supported the installation.
Jindal Steel & Power Limited
Pan-India — All Factory Locations
Jindal Steel & Power Limited has standardised on the Mitsubishi Jet Towel across all factory locations pan-India — administrative buildings, visitor centres, canteen facilities and executive washrooms. The standardisation decision was driven by the 2-year warranty, Insha Exports' pan-India service capability, and the 48-hour spare parts response from our Mumbai stock.
Reference site visits and project case studies are available on request for qualified MEP consultants and procurement teams. Contact [email protected] or WhatsApp +91 98200 49686.
City Multi VRF & Mr. Slim — LEED HVAC
City Multi VRF System
Mitsubishi Electric's City Multi VRF (Variable Refrigerant Flow) system is the preferred HVAC solution for IT parks, data centres and large commercial buildings in India. With COP values up to 4.5, it outperforms Blue Star and Samsung on energy efficiency — directly contributing to LEED EA credits.
- EA Prerequisite 2 — Minimum Energy Performance — COP 4.5 exceeds ASHRAE 90.1
- EA Credit 1 — Optimise Energy Performance — up to 14 points
- EA Credit 4 — Enhanced Refrigerant Management — R-32 low GWP
Mr. Slim Industrial Split AC
The Mitsubishi Electric Mr. Slim is a high-efficiency split air conditioning system for server rooms, control rooms, precision manufacturing and data centre edge deployments. Available in 1 HP to 5 HP with inverter technology for precise temperature control.
- EA Credit 1 — Optimise Energy Performance — inverter efficiency
Specify the Mitsubishi Jet Towel for your project.
Tell us your model preference, quantity and project type — we'll respond within 48 hours with INR pricing, LEED documentation pack, MEP tender specification language and the Mitsubishi distributorship letter.
Mitsubishi Electric — Japan
Founded in 1921 and headquartered in Tokyo, Mitsubishi Electric is one of the world's leading manufacturers of electrical and electronic equipment — from HVAC systems and factory automation to satellites and elevators. Their HVAC division is the global benchmark for energy efficiency and reliability.
The Jet Towel hand dryer, introduced in 1993, revolutionised washroom hygiene by eliminating paper towels and reducing drying time to 10 seconds. The Slim (JT-SB216KSN) and Smart (JT-SB116EH2) are the only hand dryers in India to carry LEED certification — earning credits across Water Efficiency, Energy & Atmosphere, Indoor Environmental Quality and Materials & Resources. Insha Exports is the authorized distributor for Mitsubishi Electric HVAC and Jet Towel products in India, providing supply, installation support and after-sales service from Mumbai.
Contact Our TeamCommon questions about Mitsubishi Jet Towel, LEED & TDS
Earn LEED credits with Mitsubishi Jet Towel
LEED documentation pack, MEP tender specifications, BOQ line items, TDS water efficiency narrative and INR pricing — all within 48 hours.